BSOD bootup error 0xc0000001
i boot up my laptop and BSOD comes up titled recovery, your pc couldn’t start properly. after multiple tries, the operating system on your pc failed to start, so it needs to be repaired.
error code: 0xc0000001
you’ll need to use the recovery tools on your installation media. if you don’t have any installation media (like a disc or USB device), contact your system administrator or pc manufacturer.
i have done some research into this problem and i found a lot of suggestions using the SHIFT + F8 at the bootup when the windows logo appears on screen, but that has not worked for me at all. i have tried doing that several times, but i had no success with it.
i have my original windows 8 pro upgrade installation disc with me, and i have tried the auto repair and refresh, but they do not work. also, i am running the windows 8.1 preview as well.
Replies (7)
It would be great if you can answer to these questions for a better understanding on how the blue screen error occurred on the computer.
1) Are you able to boot the computer into Windows 8 or are you still getting the blue screen error?
2) What are the recent software or hardware changes that you have made to the computer prior to this issue?
3) Is this laptop configured for dual boot with Windows 8 and Windows 8.1 Preview? If yes, are you able to boot the computer into Windows 8.1 Preview?
4) What exactly happened when you tried to perform an Automatic Repair and a Refresh? Did you get any error message?
5) Did you try booting into the Safe Mode and check the issue?
The Blue Screen errors occurs when a serious problem causes Windows 8 to shut down or restart unexpectedly. There are multiple reasons why this type of errors occurs on the computer. They usually happen when there are some driver issues in the computer. However, it might also be due to some other software/hardware reasons.
In this case, the error code: 0xc0000001 indicates that there might be some issues with the booting device or some booting files are corrupted. It might also happen if some problem happens with the boot sector of the computer. Since, the Automatic Repair did not fix the issue, let’s try rebuilding or repairing the Master Boot Record, Boot Sector and the Boot Configuration Data and check if the issue still persists. You may follow these instructions for the same:
a) Contact the computer manufacturer to know on how to change the boot order of the computer. You will have to change the boot device to CD/DVD drive and then boot from the Windows 8 installation disk.
b) In the “Windows Setup” dialog box that appears, set the Time and currency format, Keyboard or input method and the language to install and then click “Next ”.
c) Click on “Repair your computer ”.
d) Click on “Troubleshoot” and then select “Advanced Options ”.
e) Click on “Command Prompt ” and type the following commands and press “Enter” after each command:
f) Restart the computer and check if the issue still persists.
Please do get back to us with your findings. If the issue persists, we’ll be glad to assist you further.
winload.efi Error code: 0xc0000001
****** original title ***** winload.efi
Hi all. this issues started 2 days
ago when I simply wanted to restore the computer to factory settings which
seemed to go ok. as normal I uninstalled Norton and loaded comodo which would
not update, after a reboot that was sill the case. I then decided to cut my
losses and did another factory reset. I then got the following.
Recovery
Your PC needs to be repaired
The application or operating system couldn’t be
loaded because a required file is missing or contains errors.
File:
\Windows\system32\winload.efi
Error code: 0xc0000001
You’ll need to use
the recovery tools on your installation media. If you don’t have any
installation media (like a disc or USB device), contact your system
administrator or PC manufacturer.Press Enter to try again
Press F8 for
Startup Settings
Press ESC for UEFI Firmware Settings
sysinfo
OS
Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i5-3210M
CPU @ 2.50GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count:
4
RAM: 6035 Mb
Graphics Card: Intel(R) HD Graphics 4000, -1984 Mb
Hard
Drives: C: Total — 347804 MB, Free — 299078 MB; D: Total — 340350 MB, Free —
249285 MB;
Motherboard: SAMSUNG ELECTRONICS CO., LTD.,
NP350V5C-A0EUK
Antivirus: Windows Defender, Disabled
I have tried auto
repair, fixmbr etc. downloaded win 8 cdrom and tried repair computer that comes
back as failed and several more things all to no
avail.
Windows Boot
Manager
———————
identifier
description Windows
Boot Manager
locale en-GB
inherit
default
resumeobject <1b40a5bf-1802-11e2-b5e3-dc0ea1bce0ea>
displayorder
toolsdisplayorder
timeout 30
Windows Boot
Loader
——————-
identifier
device
partition=C:
path \windows\system32\winload.efi
description Windows
8
locale en-GB
inherit
recoverysequence
recoveryenabled Yes
isolatedcontext
Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot
\windows
resumeobject <1b40a5bf-1802-11e2-b5e3-dc0ea1bce0ea>
nx
OptIn
bootmenupolicy Standard
This is becoming an exercise in
frustration.
Установка Win 7 в режиме UEFI, 0xc000000d
Здравствуйте,
имеется моноблок Acer Aspire z3620 с предустановленой Win8
пытаюсь переустановить на Win7 64bit sp1 в режиме UEFI, это важно, именно UEFI.
Утилитой rufus_v1.3.4 сделал GPT UEFI установочную флэшку с официальным образом Windows7sp1 x64.
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click «Next.»
3. Click «Repair your computer.»
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Не в UEFI Win 7 загружается нормально, винда ставится.
В UEFI устанавливается только образ с Win 8.
Установка Win7x64 SP1 через UEFI flash drive на UEFI GPT | acer Aspire E1 771G
Попался мне laptop с разметкой диска GPT, что для меня в новинку. Узнал, что для работы с GPT компу.
Не устанавливется win 7 в uefi
Всем привет! Купил винт на seagate 3тб и решил поставить win7x64 на gpt-раздел (винда на старом.
Как установить win 7 через uefi ?
Решил собрать комп, купил все что нужно. Мать оказалась с uefi как установить пиратскую win 7 ? .
Можно ли установить Windows 7 x32 в UEFI-режиме на GPT-диск?
Можно ли установить Windows 7 x32 в UEFI-режиме на GPT-диск?
gecata,
————————————————————
Boot Priority Order
1. UEFI: KingstonDT 101. // — собственно, загрузочная флешка
2. CD&DVD
3. Removable Device
4. LAN
————————————————————
когда воткнута флешка, жесткий диск исчезает из списка вариантов загрузки.
Secure Boot отключен.
Такая же проблема. Решил кто-нибудь?
Никогда таким не заморачивался, ставил Win10 (все равно не себе). Но вот клиент захотел Win7 х64 на новый ноут, который понимает только загрузчики GPT UEFI.
Какая модель устройства, моноблок z3620?
Для UEFI систем нужен файл bootx64.efi. В ОС 7 его нет. Где его взять?
Взять по пути \sources\boot.wim\1\Windows\boot\EFI\bootmgfw.efi (boot.wim открыть любом архиватором, 7zip);
Переименовать в bootx64.efi;
И скопировал на флешку по пути \efi\boot\;
Папки boot нету? — создать, и поместил туда этот файл;
Грузить флешку UEFI: USB Flash Drive.
Установочная флешка.
Образ ОС только оригинал, не сборка.
ФС флешки FAT32, в инструкции выше об этом сказано.
Добавлено через 9 минут
Сначала сделать загруз. флешку по инструкции, а затем добавить файл bootx64.efi.
Как оказалась установка делается просто, я даже сам когда много лет назад пользовался этот способ, пока не сделал свои сборки:
1. LiveUSB Win10 с программой 78Setup.
2. Грузимся в WinPE, вставляем вторую флешку с своей виндой. Запускаем 78Setup, выбираем свой дистриб, тыкаем использовать загрузчик из 10 и ставим.