Windows 10 lenovo x220
Planning to update the HDD of my old Lenovo, consolidating the 350GB HDD + 250GB mSATA SSD into a single 500GB SSD, with the benefit of making it working on a SATAIII interface instead of the SATAII of the x220 mSATA slot.
Since in these 6 years of usage I never reinstalled the Windows 7 I’m wondering if will be beneficial also to reinstall a new Win10.
X220 is not listed in the Lenovo certified systems working with W10 Creators Update, wanted to know if I will probaly face troubles and also if I will nedd to install using some custom Lenovo installer.
- Posts: 3812
- Registered: 12-02-2007
- Location: US
- Views: 188478
- Message 2 of 3
Re: Upgrade to Windows 10 on ThinkPad x220
I have not had any problems running Windows 10 on my ThinkPad X220, but it is old enough that I don’t think it is officially supported by Lenovo.
From looking at http://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x220/downloads there are nearly two dozen ThinkPad X220-specific downloads which mention Windows 10 compatbility. My working assumption is that they are for hardware common to the X220 and newer devices which are supported.
I would suggest dowing a clean installation of Windows 10, and then downloading the drivers and software you need from Lenovo’s site, plus whatever Windows Update offers post-install.
I am a volunteer and neither a Lenovo nor a Microsoft employee.
L380 Yoga • P72 (20MB-*) • P50 (20EN-*) • S230u (3347-4HU) • T23 (2648-LU7) • T42 (2378-R4U) • T43p (2678-H7U) • T61p (6459-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • X220 (4286-CTO) • X250 (20CM-*) • Yoga 370
0 person found this solution to be helpful.
Windows 10 lenovo x220
С начала года пытался проапгрейдиться до Windows 10 — безрезультатно, затыкается на 99%. При этом заметил Windows 7 также не обновляется аж с 2014г., хотя стоит автообновление. В своих попытках обновить Windows 7 пропустил льготный период апгрейда до Windows 10 (до 29 июля 2016).
Что с Windows 7 и есть-ли возможность перейти на 10?
Есть-ли связь с техподдержкой Lenovo и Microsoft по электронной почте? Сейчас заграницей и надолго — Microsoft уже пробовал. связь недоступна, я так понимаю из-за другого часового пояса (круглосуточно выдает, что техподдержка их сейчас закрыта), звонить же им из-за границы разоришься, на форуме внятно внятно ничего не отвечают.
209183 Вид страницы
- Posts: 9403
- регистрация: 10-08-2013
- место: RU
- Замечания: 209183
- Message 2 of 7
Re: Х220. Не выполняется ни обновление предустановленной Windows 7, ни апгрейд до Windows 10.
С начала года пытался проапгрейдиться до Windows 10 — безрезультатно, затыкается на 99%. При этом заметил Windows 7 также не обновляется аж с 2014г., хотя стоит автообновление. В своих попытках обновить Windows 7 пропустил льготный период апгрейда до Windows 10 (до 29 июля 2016).
Что с Windows 7 и есть-ли возможность перейти на 10?
Бесплатный переход на Windows 10 закончился 29 июля 2016 г.
Теперь только покупать.
Подробности можете почитать здесь
Что касается установки обновлений Windows 7
Это известная проблема — Windows 7 может искать эти обновления по многу часов.
Есть способ решения данной проблемы вам надо скачать и вручную установить обновления Windows 7
1) KB3020369 ( Windows6.1-KB3020369-x86.msu или Windows6.1-KB3020369-x64.msu )
2) KB3172605 ( Windows6.1-KB3172605-x86.msu или Windows6.1-KB3172605-x64.msu )
Вам надо выбрать обновления, которые соответствуют разрядности установленной версии Windos 7 (x86/x64)
После ручной установки этих обновлений, система обновления Windows быстро (за 15-20 минут) должна найти примерно 200 обновлений.
Рекомендуется не устанавливать их все сразу, а порциями по 60-80 штук.
Попытка установки сразу всех обновлений обычно приводит к переполнению кэша обновлений.
В результате чего обнвления устанавливаются очень долго.
225693 Вид страницы
- Posts: 3291
- регистрация: 07-02-2014
- место: SK
- Замечания: 225693
- Message 3 of 7
Re: Thinkpad Х220. Не выполняется ни обновление предустановленной Windows 7, ни апгрейд до Windows 1
Добро пожаловать на форум!
Проблема 99% присутановке обновления была и у меня на Т440. Пробовал решение из этой темы — Windows 10 Upgrade Assistant Stuck at 99% Installing — не помогло, но может быть вам поможет.
40292 Вид страницы
- Posts: 2816
- регистрация: 05-30-2016
- место: RU
- Замечания: 40292
- Message 4 of 7
Re: Thinkpad Х220. Не выполняется ни обновление предустановленной Windows 7, ни апгрейд до Windows 1
dmaa а Вы уверены, что хотите перейти на 10ку? Должен предупредить, что после ее установки Вы потеряете возможность перейти на 7ку и система восстановления на вашем финике перестанет работать.
Если желаете хоть, когда вернуться на W7, купите HDD той же емкости, что стоит у Вас и сделайте копию ПОСЕКТОРНО, менеджером диска (к примеру, акронис). Потом эту копию можно записывать на встроенный HDD и восстанавливать систему в прежнем виде. Если ЭТОГО не сделать, я не знаю кто сможет Вам помочь сделать возврат в прежнее состояние. К примеру, купить SSD (меньше 500гб не стоит) вместо HDD. Аппарат просто летать начнет, а родной останется для аварийной подстраховки.
Насчет «звонить с заграницы», мне термин не понятен, Вы находитесь вне границ РФ? Но если Вам доступна страница https://www.microsoft.com/ru-ru/software-download/windows10 то Вы можете спокойно перейти на 10, без всяких проблем. Но есть одна загвоздка! Утилита скачает на Ваш комп 10ку и тут же попробует накачать обновления на эту же десятку. А так как у Вас «мертвая» служба автоматического обновления, это приложение «повиснет» на закачке обновлений для W10. Что делать? Зайдите в управление компьютером, службы и приложения, службы. Найдите среди служб «центр обновления Windows» (название пишу по памяти, для W7 погуглите ее название) и останавливайте службу и запускайте ее заново при работе утилиты обновления. Если она подвисает на этапах обновления, останавливайте службу, как утилита прекратила подвисание, и тут же запускайте, как зависание преодолено. Так Вы протолкнёте установку W10 на свой финик. Пропущенные обновления потом доустановите в обычном порядке. Не забудьте проверить активацию 10ки. Во все периоды установки W10 не отключайте сеть (желательно проводную).
Обращаю так же Ваше внимание, что порядка 6-8 программ от Леново перестанут работать. W10 их отрубит и предупредит об этом Вас (к примеру, программа работы с отпечатками пальцев). Поэтому НАСТОЯТЕЛЬНО советую сохранить Ваши данные, сбросить финик СРАЗУЖЕ в заводские установки до начала установки 10ки (запустить Леново рекавери и восстановить ОСь до заводских настроек). Если Вы пользовались паролем: «Вашими пальцами», то после обновления Вы ничего не введете и никогда не попадете в новую десятку. Все настроить можно позже, и на основании программ с 10ки.
Теперь пару слов по работе на 10ке. Месяца через три/четыре советую стереть все под корень и поставить чистую установку 10ки. Причина в том, что переезд с 7ки тянет за собой море глюков, от которых я не знаю, как избавляться. И их видел именно на X220. Если готовы расстаться с «фишками» от Леново, то рекомендую поступить именно так. Конечно утилиты надо ставить (к примеру, иначе как управлять горячими клавишами?). И готовиться к таким работам придётся планомерно, пошагово. Активация 10ки (при установке чистой от майкрософт) пройдет без проблем (я не сталкивался с проблемами) автоматически.
Windows 10 lenovo x220
#1 Post by iceblitzed » Tue Aug 04, 2015 7:50 am
Re: x220 upgrading to win 10
#2 Post by mpcook » Tue Aug 04, 2015 10:00 am
Re: x220 upgrading to win 10
#3 Post by erik » Tue Aug 04, 2015 4:05 pm
i installed win 10 enterprise on my X220 and can confirm that everything works. i recommend installing in full UEFI-only mode for the quickest boot time.
from my own experience, you’ll need to install the following driver packages:
- ultranav: http://support.lenovo.com/us/en/downloads/DS019164
-> updated for win 10: http://support.lenovo.com/us/en/downloads/DS103454 - multicard reader: http://support.lenovo.com/us/en/downloads/DS032126
- fingerprint reader: http://support.lenovo.com/us/en/downloads/DS036923
- serial-over-LAN: http://support.lenovo.com/us/en/downloads/DS101006
you’ll see yellow bangs in device manager for the MCR and SoL drivers. ultranav, if installed, will be a newer version and i recommend rolling back to driver 16.2 (linked in my list) if you want full control over the trackpoint within the mouse control panel. the fingerprint reader will work without the lenovo package but won’t allow full control. install the fingerprint software to control preboot and single-swipe power-on swipes, plus activate the power light correctly at the lock screen.
this should leave you with little to no extra work needed. install win 10 and the drivers above and it should go fairly smoothly.
note: i installed win 10 clean, not over an existing win 7 installation, and can’t speak to that process.
Re: x220 upgrading to win 10
#4 Post by ansible212 » Wed Aug 05, 2015 11:46 am
I have upgraded my X220 (and indeed my X200s) from Windows 7 to Windows 10, and have experienced no problems.
Generally impressed, in particular dual monitor support (somewhat trivial, I know, but sometimes it’s the little things that count).
All devices work as intended. Battery life appears to be better.
Seems to be faster than Windows 10, too.
Addendum: the only major issue I am having is repeated requests to install Lenovo’s System Interface Driver which is preventing the Lenovo Modern Apps from functioning. I can mostly live with that.
Minor issue — occasionally search invoked from the Start Menu doesn’t return any results. Logging off and back on appears to resolve that (others are having far greater problems related to the Start Menu and search, so I count myself lucky).
X1C 5th Gen : WQHD : i7-7500U : 16GB : 1TB Samsung 970 Pro : ThinkPad Thunderbolt 3 Dock : ThinkVision P32u-10
X220 : Premium HD : i7-2640M : 8GB : 256GB Samsung 850 Pro : Mini Dock Series 3 with USB 3.0
X200s : WXGA : C2D SL9600 : 4GB : 256GB Samsung 830 : Ultrabase
Re: x220 upgrading to win 10
#5 Post by iceblitzed » Sat Sep 12, 2015 1:54 am
Re: x220 upgrading to win 10
#6 Post by josto » Fri Jan 15, 2016 2:03 pm
I did not manage to get Win10 Pro 64bit to run on my X220 (i7, IPS Panel, SanDisk 240GB SSD SATA). I only tried the upgrade from Win7 (without migrating anything) because I don’t have a Win10 product key, only one for Win7.
What happens is: after the first reboot, the system freezes shortly after the windows logo appears. After a hard-reset, windows setup re-creates the original state of the system (Win7) and displays an error message when bootet up, giving the following code: 0xC1900101 — 0x20017
Has anybody an idea what could be the cause of the freeze? Win7 and Win8.1 both install with no problems.
Re: x220 upgrading to win 10
#7 Post by lukabike » Tue Mar 08, 2016 10:19 am
Re: x220 upgrading to win 10
#8 Post by jdrou » Tue Mar 08, 2016 5:24 pm
Re: x220 upgrading to win 10
#9 Post by janew1 » Fri Apr 01, 2016 2:00 am
I installed Windows 10 64-bit pro on my x220 with no problems. The drivers all seem fine, and everything looks happy in the device manager.
I did have to fool around with the USB3 driver, and Windows did not immediately recognize the IPS display. But both of these were situations — ah, Windows! — where I just messed around with it for a while and it worked. But I didn’t have to go looking for other drivers, etc.
(I actually did that for the USB3, getting the drivers from Renesas. But they didn’t work either (the port remained in USB2). It was when I reinstalled the Windows drivers that it started to work properly.)
Stuff just randomly breaks, too, like the Windows store apps. But the internet seems to indicate that this is par for the course, and probably has nothing to do with the hardware. With Windows 7, my experience was that you could eventually get the event log to be reliably free of errors. Not Windows 10!
I also managed to get Lenovo Power Manager to work, too, which is nice because I can now keep the battery at a lower level for full charge. This involved installing the Lenovo PM by fiddling around with the Win 10 «program compatibility» options. Of course, it didn’t work the way the internet said it should, but again I just tried a few different ways to do it and finally it worked.
I wish I could pass along how I got these things to work, but this just seems to be how it is with Windows (for me, anyhow). The internet has all kinds of random advice, some of it pointless — how many times have I uselessly run sfc /scannow — and some of it very wrong. (For example, if the Windows 10 apps don’t work do not try the global Powershell reset!) Something among all of that randomness then seems to kind of work, and after that it’s just random trial-and-error.
I do like Windows 10, though. Maybe just because it’s new.