Qualcomm atheros qca9377 linux
If nothing happens, download GitHub Desktop and try again.
Launching GitHub Desktop
If nothing happens, download GitHub Desktop and try again.
Launching Xcode
If nothing happens, download Xcode and try again.
Launching Visual Studio
Latest commit
Git stats
Files
Failed to load latest commit information.
README.md
Drivers and Firmware for Qualcomm Atheros QCA9377 Driver 0042 [rev. 30]. This repo also contains PKGBUILD for Arch Distribution and a generic bash script for any GNU\Linux distro.
This repo is depreciated and not under maintenance. Developers are welcome to maintain this repo
##For Arch Linux Distro makepkg -i
##For Any Distro chmod +x install.sh
###For Kernel 4.4-rc2 Compile your own kernel by applying qca9377_hw1.1_for_linux_4.4-rc2.patch to the kernel source code.
Use distribution specific kernel compilation steps (Read it more about it on your distribution wiki pages).
chmod +x install_for_kernel_4.4-rc2.sh
About
Drivers and Firmware for Qualcomm Atheros QCA9377 0042 [rev. 30]
Решено Qca9377 rev31 режим мониторинга
Member
Привет, поставил parrot os , драйвера на wifi модуль qca9377 rev 31 подтянулись не те и при переводе в мониторинг не ищет точки, также и в кали Линукс и в лайв версиях
Скачал драйвера ath10k-firmware-master возможно с ними модуль будет работать корректно, но не могу понять как их установить, доступа в интернет нет, версия паррот последняя security 4.7, прошу помощи
Процессы убиваю , перевожу в мониторинг, поиск пуст
Нашел на форуме следующий ответ, но не понимаю как применить на деле «проблема в rfkill при режиме мониторинга он просто блокировал wifi»
Но при вводе rfkill list везде показано NO
И в режиме мониторинга и в режиме station
Member
Итог следующий на скрине, при вводе y , либо n происходит рестарт
Выполнение от sudo результата не дало
Пробовал ставить install_for_kernel4.4-rc2.sh также не помогло
Вот эти дрова хотелось бы накатить ревизия 31 подходит, но файлов инсталл нету, только makefile какой то, давай попробуем
Вложения
Member
Попробовал в папку с дровами формата Бин подложить файлы из предложенного мной архива выше . МММ получается старые файлы заменились на новые, но ничего не поменялось. Видимо версия не распаковалась или не подошла или не запаковалась в ядро.
Up после удаления всех файлов из папки через sudo rm произвел рестарт и вайфай не подтянулся, осталось подобрать верные драйвера и подложить их в папку , драйвер состоит по видимому из 1 board и 1 firmware файлов
Вложения
Member
Member
Aleksandr79
New member
Итого совмещаю решение проблемы:
Качаем данный архив
Пробуем открыть install.sh в режиме терминала
Перезагружаемся, пробуем режим мониторинга.
Если не работает идем по пути
cd /lib/firmware/ath10k/QCA9377/hw1.0/ -путь к нашей папке
сносим все файлы командой sudo rm название_вашего_файла_(можно_табом_вводить)
подкладываем файлы в папку вручную — должно быть 3 файла подписанные как board.bin firmware-5.bin notice.txt_WLAN_TF_кракозябра
перезагружаемся и пробуем режим мониторинга — у меня заработало =)
Если у вас не работает — не унываем — качаем архив
Бро всё заработало!
Утром внимательней прочитал и сделал как ты описал и всё заработало. Спасибо за подсказку решения проблемы. Всё-же проблемм была в дровах.
Qualcomm Atheros QCA9377 wireless not working on lenovo with 14.04.3
Help, I’ve tried the other fixes used for ubuntu 15.10 and the Qualcomm adapter but nothing is working for my lenovo ideapad 500 with the Qualcomm Atheros QCA9377 wireless adapter running 14.04.3. could i be using the wrong terminal commands? im using this set of commands found in another post:
any help appreciated
3 Answers 3
Reboot and tell us if it’s working.
This is how I fixed the WiFi issue in my Laptop
Identify your WiFi device. Open a terminal and issue:
Once you have made sure that the Network device is the one above, follow the below steps to install the driver for WiFi ##### Install git and tools to compile the driver:
Reboot your machine. That’s it. Your WiFi should work now until you do a kernel update.
Linux Mint Forums
Welcome to the Linux Mint forums!
Qualcomm Atheros QCA9377
Qualcomm Atheros QCA9377
Post by cutano » Sat Sep 02, 2017 5:44 pm
Re: Qualcomm Atheros QCA9377
Post by JeremyB » Sat Sep 02, 2017 6:36 pm
Re: Qualcomm Atheros QCA9377
Post by cutano » Tue Sep 05, 2017 8:20 am
ii linux-firmware 1.157.11 all Firmware for Linux kernel drivers
Also be aware this is a new laptop Ideapad 310 15ISK that came with Windows 10. My other issue is that when the power cable is plugged into the AC outlet my wifi card disappears on boot. When I boot on battery, my wifi card shows up in Network manager. (very strange). I did check my bios for any power management options but do not have any. I also tried turning off power management to the wifi card but that didn’t help either. BTW here is the erst of the info from the command line.
Re: Qualcomm Atheros QCA9377
Post by cutano » Tue Sep 05, 2017 8:23 am
System: Host: christopher-Lenovo Kernel: 4.4.0-93-generic x86_64 (64 bit gcc: 5.3.1)
Desktop: MATE 1.14.1 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18 Sarah
Machine: System: LENOVO (portable) product: 80SM v: Lenovo ideapad 310-15ISK
Mobo: LENOVO model: Toronto 5A2 v: SDK0J40700 WIN
Bios: LENOVO v: 0XCN37WW date: 10/03/2016
CPU: Dual core Intel Core i5-6200U (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9600
clock speeds: max: 2800 MHz 1: 499 MHz 2: 499 MHz 3: 499 MHz
4: 499 MHz
Graphics: Card: Intel Sky Lake Integrated Graphics bus-ID: 00:02.0
Display Server: X.Org 1.18.3 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1366×768@59.97hz
GLX Renderer: Mesa DRI Intel HD Graphics 520 (Skylake GT2)
GLX Version: 3.0 Mesa 11.2.0 Direct Rendering: Yes
Audio: Card Intel Sunrise Point-LP HD Audio
driver: snd_hda_intel bus-ID: 00:1f.3
Sound: Advanced Linux Sound Architecture v: k4.4.0-21-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: 3000 bus-ID: 01:00.0
IF: enp1s0 state: down mac:
Card-2: Qualcomm Atheros Device 0042
driver: ath10k_pci bus-ID: 02:00.0
IF: wlp2s0 state: up speed: N/A duplex: N/A mac:
Card-3: Atheros usb-ID: 001-005
IF: null-if-id state: N/A speed: N/A duplex: N/A mac: N/A
Drives: HDD Total Size: 275.1GB (5.8% used)
ID-1: /dev/sda model: Crucial_CT275MX3 size: 275.1GB
Partition: ID-1: / size: 245G used: 7.4G (4%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 8.49GB used: 0.00GB (0%) fs: swap dev: /dev/dm-0
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 31.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 198 Uptime: 5 min Memory: 742.3/7889.6MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
Re: Qualcomm Atheros QCA9377
Post by JeremyB » Tue Sep 05, 2017 4:54 pm
I don’t know why the wireless card doesn’t show when the AC is plugged in but it is possible that going into BIOS and reset to defaults might help
Re: Qualcomm Atheros QCA9377
Post by cutano » Wed Sep 06, 2017 9:01 am
Arch Linux
You are not logged in.
#1 2018-01-08 19:06:47
[SOLVED] Kernel issues with Qualcomm Atheros QCA9377
I recently installed the Arch Linux system to my new Lenovo Thinkpad laptop computer. The wireless network adapter that the computer uses is Qualcomm Atheros QCA9377. It seems that the drivers of this network adapter are not supported by the default kernel of Arch Linux but that the support can be enabled with a suitable patch. I’m currently trying to create a package based on https://github.com/ajaybhatia/Qualcomm- … Wifi-Linux and to install it. However, when I try to create the package with makepkg -i, I encounter the following message
Running the script qca9377_hw1.1_for_linux_4.4-rc2.sh does not help because the script seems to only reboot my computer without taking any effect on the kernel. With the package comes the file qca9377_hw1.1_for_linux_4.4-rc2.patch which probably should be applied on the kernel directly if I only knew how to accomplish this. Could you please point me to a way to apply the patch succesfully?
Last edited by catnap (2018-01-08 23:37:32)