HPE USB Key Utility для Windows
USB Key Utility — приложение для Windows, которое позволяет пользователю записать содержимое ISO образа или DVD на USB флешку. Источниками ISO образов могут быть SmartStart CD, Firmware Maintenance CD, Smart Update Firmware DVD, Intelligent Provisioning Recovery DVD, Service Pack for ProLiants или другие распространяемые HPE продукты. USB флешка получается загрузочной, можно воткнуть её в сервер и успешно с неё загрузиться.
Зачем это нужно
Например, вы можете модифицировать SPP ISO образ, добавив в него дополнительные драйвера и прошивки. Потом записать его на USB флешку и радоваться. На сервер не только установится сам сервис-пак, но и ваши дополнения.
Как записать ISO образ на USB флешку
Качаем последнюю версию USB Key Utility for Windows, у меня это Версия:3.0.0.0 (12 Jul 2017):
Имя файла: cp029814.exe (3.1 MB). Качаем его и распаковываем. Запускаем usbkey.exe:
Принимаем лицензионное соглашение и жмём Далее:
Здесь нужно выбрать, создаём загрузочный USB или добавляем контент к USB. Далее:
Нас просят воткнуть USB флешку, втыкаем и жмём Далее:
Выбираем источник, DVD или ISO. У меня ISO, выбираю и жму «. » — browse:
Выбираю ISO, жму Открыть:
ISO выбрано, проверяю, что выбран нужный USB диск, жмём Далее:
Драйверы и программное обеспечение
* RECOMMENDED * HP USB Key Utility for Windows
Загрузка файла означает ваше согласие с условиями и положениями Лицензионного соглашения на программное обеспечение Hewlett Packard Enterprise.
Примечание. Для использования некоторых программ необходимо наличие действующей гарантии, контракта на поддержку с Hewlett Packard Enterprise или оплаченная лицензия.
| Тип: | Утилита — Средства | |||||||||
| Версия: | 1.7.0.0(27 мар 2012) | |||||||||
| Операционная система(ы): |
| |||||||||
| Имя файла: | cp015352.exe (1.4 MB) | |||||||||
Due to system security configuration set to «high», a supported system may experience any of the following errors when attempting to install or update the system with HP USB Key Utility for Windows version 1.7.0.0:
- «This program has been blocked for your protection»
- «Blocked»
- «Not Trusted»
- MSIExec installation error (Return code: 1625)
- «The recommended software listed below could not be installed…»
Prerequisites:
One or more of the following:
- HP Service Pack for ProLiant
- HP SmartStart CD version 7.5x and greater.
- HP Firmware Maintenance CD version 7.5x and greater.
- HP Smart Update Firmware DVD version 9.00 and greater.
- HP Easy Set-Up CD version with G6 servers and greater.
And:
- Minimum 1GB USB 2.0 flash drive (maximum size is 32GB).
After successful installation of the HP USB Key Utility, the USB flash drive can be used on supported ProLiant servers.
To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:
| 34a689290ebd69b414c74defa4e562bf87376f3c14afe53b0815acc92be5bd7b | cp015352.exe |
Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Due to system security configuration set to «high», a supported system may experience any of the following errors when attempting to install or update the system with HP USB Key Utility for Windows version 1.7.0.0:
- «This program has been blocked for your protection»
- «Blocked»
- «Not Trusted»
- MSIExec installation error (Return code: 1625)
- «The recommended software listed below could not be installed…»
Upgrade Requirement:
Recommended — HPE recommends users update to this version at their earliest convenience.
After installation, the utility will place a shortcut in ‘HP System Tools’ in the ‘Programs’ start menu folder.
To make your drive key bootable and copy the contents of the CD:
- Place your HP USB drive key in an available USB port.
- Select the ‘HP USB Key Utility’ shortcut in the ‘HP System Tools’ folder.
- Complete each step presented by the application.
Upgrade Requirement:
Recommended — HPE recommends users update to this version at their earliest convenience.
Fixes issues opening large ISO files.
| Тип: | Утилита — Средства | ||||||||||
| Версия: | 1.7.0.0(27 мар 2012) | ||||||||||
| Операционная система(ы): |
| ||||||||||
Описание
Инструкции по установке
Due to system security configuration set to «high», a supported system may experience any of the following errors when attempting to install or update the system with HP USB Key Utility for Windows version 1.7.0.0:
- «This program has been blocked for your protection»
- «Blocked»
- «Not Trusted»
- MSIExec installation error (Return code: 1625)
- «The recommended software listed below could not be installed…»
Prerequisites:
One or more of the following:
- HP Service Pack for ProLiant
- HP SmartStart CD version 7.5x and greater.
- HP Firmware Maintenance CD version 7.5x and greater.
- HP Smart Update Firmware DVD version 9.00 and greater.
- HP Easy Set-Up CD version with G6 servers and greater.
And:
- Minimum 1GB USB 2.0 flash drive (maximum size is 32GB).
After successful installation of the HP USB Key Utility, the USB flash drive can be used on supported ProLiant servers.
To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:
| 34a689290ebd69b414c74defa4e562bf87376f3c14afe53b0815acc92be5bd7b | cp015352.exe |
Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Замечания о версии
Due to system security configuration set to «high», a supported system may experience any of the following errors when attempting to install or update the system with HP USB Key Utility for Windows version 1.7.0.0:
- «This program has been blocked for your protection»
- «Blocked»
- «Not Trusted»
- MSIExec installation error (Return code: 1625)
- «The recommended software listed below could not be installed…»
Upgrade Requirement:
Recommended — HPE recommends users update to this version at their earliest convenience.
After installation, the utility will place a shortcut in ‘HP System Tools’ in the ‘Programs’ start menu folder.
To make your drive key bootable and copy the contents of the CD:
- Place your HP USB drive key in an available USB port.
- Select the ‘HP USB Key Utility’ shortcut in the ‘HP System Tools’ folder.
- Complete each step presented by the application.
Исправления
Upgrade Requirement:
Recommended — HPE recommends users update to this version at their earliest convenience.
Fixes issues opening large ISO files.
История изменений
Заявление об отказе от ответственности Продукты, проданные до 1 ноября 2015 года, т.е., до момента раздела компании Hewlett-Packard на компании Hewlett Packard Enterprise и HP Inc., могут иметь старые наименования и номера моделей, отличающиеся от текущих моделей.
Драйверы и программное обеспечение
HP USB Key Utility for Windows
Загрузка файла означает ваше согласие с условиями и положениями Лицензионного соглашения на программное обеспечение Hewlett Packard Enterprise.
Примечание. Для использования некоторых программ необходимо наличие действующей гарантии, контракта на поддержку с Hewlett Packard Enterprise или оплаченная лицензия.
| Тип: | Утилита — Средства | |||||||||||
| Версия: | 1.8.0.0(24 фев 2015) | |||||||||||
| Операционная система(ы): |
| |||||||||||
| Имя файла: | cp023126.exe (1.4 MB) | |||||||||||
Prerequisites:
One or more of the following:
- HP Service Pack for ProLiant
- HP SmartStart CD version 7.5x and greater.
- HP Firmware Maintenance CD version 7.5x and greater.
- HP Smart Update Firmware DVD version 9.00 and greater.
- HP Easy Set-Up CD version with G6 servers and greater.
And:
- Minimum 1GB USB 2.0 flash drive (maximum size is 32GB).
After successful installation of the HP USB Key Utility, the USB flash drive can be used on supported ProLiant servers.
To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:
| 239075d4a496f4445e7891d6db11f349641be16399ee9384c6dead95a9c5814b | cp023126.exe |
Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
After installation, the utility will place a shortcut in ‘HP System Tools’ in the ‘Programs’ start menu folder.
To make your drive key bootable and copy the contents of the CD:
- Place your HP USB drive key in an available USB port.
- Select the ‘HP USB Key Utility’ shortcut in the ‘HP System Tools’ folder.
- Complete each step presented by the application.
Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Updated installer to support new OSes(Windows 2012 R2, Windows 8, etc)
| Тип: | Утилита — Средства | ||||||||||||
| Версия: | 1.8.0.0(24 фев 2015) | ||||||||||||
| Операционная система(ы): |
| ||||||||||||
Описание
Инструкции по установке
Prerequisites:
One or more of the following:
- HP Service Pack for ProLiant
- HP SmartStart CD version 7.5x and greater.
- HP Firmware Maintenance CD version 7.5x and greater.
- HP Smart Update Firmware DVD version 9.00 and greater.
- HP Easy Set-Up CD version with G6 servers and greater.
And:
- Minimum 1GB USB 2.0 flash drive (maximum size is 32GB).
After successful installation of the HP USB Key Utility, the USB flash drive can be used on supported ProLiant servers.
To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:
| 239075d4a496f4445e7891d6db11f349641be16399ee9384c6dead95a9c5814b | cp023126.exe |
Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Замечания о версии
Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
After installation, the utility will place a shortcut in ‘HP System Tools’ in the ‘Programs’ start menu folder.
To make your drive key bootable and copy the contents of the CD:
- Place your HP USB drive key in an available USB port.
- Select the ‘HP USB Key Utility’ shortcut in the ‘HP System Tools’ folder.
- Complete each step presented by the application.
Исправления
Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Updated installer to support new OSes(Windows 2012 R2, Windows 8, etc)
История изменений
Заявление об отказе от ответственности Продукты, проданные до 1 ноября 2015 года, т.е., до момента раздела компании Hewlett-Packard на компании Hewlett Packard Enterprise и HP Inc., могут иметь старые наименования и номера моделей, отличающиеся от текущих моделей.