990x.top
Простой компьютерный блог для души)
HP On-Screen Display что это за программа? (процесс HPOSD.EXE)
Всем привет. Сегодня у нас будет разговор о такой программе как HP On-Screen Display, что это такое и для чего, будем узнавать вместе. Пока я в догадках, но ясно уже одно, это фирменная прога, то есть была создана производителем для своих же устройств. Итак, вот уже есть первая инфа. Вроде как HP On-Screen Display это прога для ноутбуков HP, после установки которой можно менять яркость и громкость звука. Ага, то есть яркость и звук можно регулировать при помощи ноутбучных кнопок, вот пишется что делается это сочетанием кнопки Fn и стрелочек =)
Еще может быть такое, что прога HP On-Screen Display может визуально оповещать о том что включено, а что нет, ну например Wi-Fi, или еще что-то.. Да уж, а инфу то не просто откопать, вот роюсь тут среди сайтов, а инфы нет! =(
Еще мне удалось выяснить, что HP On-Screen Display запускается вот из этой папки:
C:\Program Files (x86)\Hewlett-Packard\HP On Screen Display\
В крайнем случае может лежать не в Program Files (x86), а в просто Program Files, это если 64-битная версия проги… И работает кстати под таким процессом как HPOSD.EXE =)
Пытаюсь вот найти картинки какие-то тематические… Так, минутку. Вот о чем я еще подумал. Тут на одном сайте пишется, что эта прога нужна для отображения изменений настроек. В принципе, если внимательно посмотреть на название HP On-Screen Display, то вроде это оно и есть. То есть при помощи этой проги вы в удобном формате видите изменения громкости, выключение чего-то там или включение, изменения яркости. Не знаю будут ли работать сочетания кнопок с Fn без HP On-Screen Display, но думаю что будут все таки. В любом случае данная программа не является критически важной, это уже точно.
О, вроде нашел инфу еще! Вот читаю, что еще эта прога добавляет значок в трей, и если нажать по этому значку, то будет вроде как такая менюшка:
Так, что тут в менюшке есть? Пункт Hibernation (Fn+F12) нужен чтобы перевести комп в режим гибернации (типа спящий режим вроде). Далее идут User Key, это вроде для того чтобы самому задать действие для сочетания кнопок, и все это дело настраивается в User Key Settings, кстати если этот пункт выбрать, то отобразится окошко User Key Define:
Значит видите тут есть поля текстовые? Вот тут нужно указать прогу, для этого воспользуйтесь кнопкой Program Search, потом выберите прогу, после чего должен отобразиться путь в текстовом поле, после этого нажимаете OK и все. Ну вроде бы все работает именно так =)
Пункт System information (Fn+F10) нужен наверно чтобы отобразить системную информацию о ноуте. Пункты Brightness Up (Fn+Home) и Brightness Down (Fn+End) нужны для изменения яркости. Ну Volume думаю понятно, это громкость. А Keyboard/Touchpad Settings это видимо настройки клавы/тачпада, нашел картинку, вот какое будет окошко если выбрать этот пункт:
Видите тут есть галочка Internal Numeric Keypad Disable Using External USB Keyboard (можно было и покороче сделать название)? Ну так вот эта галка нужна чтобы отключить Num Lock на встроенной клаве при подключении внешней USB-клавы. Num Lock это кнопка братишка кнопки Caps Lock и она нужна чтобы включить цифровой блок, который обычно расположен справа на клавиатуре (там еще кнопки как на калькуляторе) =) Ах да, тут еще есть Internal Touchpad, ну это меню позволяет включить или выключить встроенную сенсорную панель, короче говоря тачпад.
То есть собственно уже благодаря тому что я нашел картинку этого меню, то мы уже видим для чего нужна программа HP On-Screen Display.
Так, вот вроде еще читаю что не все эти опции могут поддерживаться, ну что в меню на картинке, это еще от модели ноута зависит…
Ребята, нашел картинку, вот получается что если у вас стоит прога HP On-Screen Display, то при изменении громкости вы будете видеть примерно что-то типа такого:
Значит ребята, я думаю что мы как-то более менее разобрались с тем что за прога HP On-Screen Display. Прога нужна для настройки работы ноутбучных кнопок, то есть Fn в сочетании с еще какой-то. Также прога играет информационно-визуальную роль, то есть отображает изменение настроек. Будут ли работать сочетания с кнопкой Fn без этой проги? Честно ребята я не знаю, ибо непонятно драйвер это или нет. Но кажется что это просто дополнительная прога, не драйвер это. Теперь я ребята вам покажу как удалить HP On-Screen Display, ну мало ли, вдруг вы уверены, то эта прога вам не нужна.. Итак, зажимаете кнопки Win + R, далее вставляете команду:
Далее у вас отобразится окно с прогами:
Где нужно отыскать HP On-Screen Display, нажать правой кнопкой, выбрать Удалить, ну и потом просто следовать инструкциям мастера удаления =)
Вот и поговорили ребята, надеюсь теперь вы знаете предназначение HP On-Screen Display и сможете сделать выводы о нужности этой проги. Ну а мне остается пожелать вам удачи и отличного настроенчика!
Display on screen
The left edge of documents and excel are hidden behind the black monitor border.
Welcome to the HP Forums!
Thank you for posting your query on this forum, it’s a great place to find answers.
I reviewed your post and I understand that the left side documents are hidden behind the monitor border.
Don’t worry, I assure you I will try my best to get this sorted.
In order that I may provide you with an accurate solution, I will need a few more details.
- When was the last time the display was working fine?
- Does this happen with all the software/applications?
- Have you connected multiple monitors to the computer?
- Have you made any software or hardware changes on the computer?
- Have you performed any troubleshooting steps before posting?
Meanwhile, I recommend you follow the below steps and check if it helps.
- Make sure that the display resolution is set to 1920×1080.
- Reset the monitor to factory settings from the monitor front panel.
Here is how it is done.
1. If the monitor is not already on, press the Power button to turn on the monitor.
2. To access the OSD menu, press the Menu button on the right side of the monitor or on the remote control.
3. To navigate through the OSD menu, press the + (Plus) button on the monitor’s side panel or on the remote control to scroll up, or the – (Minus) button to scroll down.
4. To select an item from the OSD menu, use the + or – buttons to scroll to and highlight your selection, then press the Menu button to select that function.
5. Adjust the item using the + or – buttons to adjust the scale.
6. After adjusting the function, select Save and Return, or Cancel if you don’t want to save the setting, then select Exit from the Main menu.
If the issue persists, I suggest you make sure that the documents are maximized mode when you open them.
Let me know how it goes and you have a great day!
If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!
The_Fossette
I am an HP Employee
Драйверы и программное обеспечение
* RECOMMENDED * HP SmartStart CD x64
Загрузка файла означает ваше согласие с условиями и положениями Лицензионного соглашения на программное обеспечение Hewlett Packard Enterprise.
Примечание. Для использования некоторых программ необходимо наличие действующей гарантии, контракта на поддержку с Hewlett Packard Enterprise или оплаченная лицензия.
| Тип: | Программное обеспечение — CD-ROM | ||||||||||||
| Версия: | 8.70(B)(1 дек 2011) | ||||||||||||
| Операционная система(ы): |
| ||||||||||||
| Имя файла: | smartstart-8.70B-0-x64.zip (625 MB) | ||||||||||||
New SmartStart 8.70b Features:
- Support for newly released AMD Opteron 6200 Series Processors. NOTE: 8.70b is web release only — no media will be provided for this release.
Hardware and Software Support:
HP SmartStart CD x64 version 8.70 (B) contains one or more software components that were signed with a digital signature that was revoked on October 21, 2014. Refer to Customer Advisory c04395762 for more information about affected components.
To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:
| 86b1ecf8aad403ea93dfd019cd3ad1971dcf5380d72bbc5ea1287ea29334dafb | smartstart-8.70B-0-x64.zip |
Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
For Available Support Documentation for SmartStart 8.70 and 8.70b:
Contents of this ZIP file:
Making a physical CD from an ISO image file
Download the file to a temporary directory and extract the ISO image to that directory.
To create a CD from this ISO image, you must use a software utility capable of writing an ISO file to a recordable media such as CD-R.
- Note: Simply copying the ISO file to a CD-R will NOT result in a usable CD. HP recommends you run MD5 Checksum on the Zip file and/or ISO image prior to burning the CD. HP also recommends that you turn the verify feature «ON».
CD labeling: For reference purposes, please label your resulting CD as follows:
Copying the ISO Image file to the HP USB Key Utility For Windows
The HP USB Key Utility is a Windows application that will allow the user to copy the Firmware Maintenance CD contents to a USB memory key. Users may then run the Firmware Maintenance applications from a USB key instead of from the CD. To download the HP USB Key Utility for windows, go to: www.hp.com/go/foundation.
HP SmartStart CD x64 version 8.70 (B) contains one or more software components that were signed with a digital signature that was revoked on October 21, 2014. Refer to Customer Advisory c04395762 for more information about affected components.
Upgrade Requirement:
Recommended — HPE recommends users update to this version at their earliest convenience.
**ATTENTION** IMPORTANT WINDOWS INFORMATION:
If installing Windows® Server 2008 Service Pack 2 (x64) with four AMD Opteron™ 6200 Series Processors and greater than 32 cores, Microsoft hotfix kb2563727 will need to be applied. To install without this hotfix, reduce the processor core count to 32 or less through ROM Based Setup Utility (RBSU) until the hotfix is applied. For more information refer to: Microsoft Article ID 2563727 «0x000000BE» Stop error when you install Windows Vista or Windows Server 2008 if more than two 16-core Opteron™ 6200 Series processors are installed (http://support.microsoft.com/kb/2563727)
SmartStart v8.70b is the recommended SmartStart to use when installing HP Branded Microsoft® Windows® products. The previous version, SmartStart v8.70, does not support AMD Opteron TM 6200 Series Processors. To obtain SmartStart v8.70b, see the HP website: (http://www.hp.com/support). Note: No media will be provided. SmartStart 8.70b is web release only.
Windows® Small Business Server 2011 Essentials requires that a network card be connected during installation. If there is no network access, installation will stop with an error. In order to continue, user needs to connect the system to network and click reboot button on the screen. Rebooting may require the user to enter in the default password, «Admin». For best results, please insure the network ports are connected before beginning installation.
Important SmartStart 8.70 / 8.70b Information:
Beginning with the 8.70 release, Fibre Channel will not be loaded by default. Once the OS is loaded, all normal drivers including Fibre Channel will be available.
Customer Advisory c02981742 — SmartStart 8.70 — Unable to Install SmartStart From Operating System Media Onto a Bootable USB Key. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c02981742
Important SUSE Linux Enterprise Server 11 SP1 Information:
Customer Advisory c03035647 — SUSE Linux Enterprise Server 11 SP1- Linux Will Kernel Panic When Installing on an HP ProLiant Server With an AMD Opteron or 4200-series Processor or AMD Opteron 6200-Series Processor. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c03035647
Customer Advisory c03087321 — SUSE Linux Enterprise Server 11 SP1 — Xen May Stop Responding When Installing a Virtual Machine on an HP ProLiant Server With an AMD Opteron or 4200-Series Processor or AMD Opteron 6200-Series Processor. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c03087321
Important PSP Information:
Customer Advisory c01802766 — Integrated Lights-Out 2 (iLO 2) Firmware Version 1.81 (Or Earlier) And iLO 2 Management Controller Driver Version 1.11.1.0 (Or Earlier) — ProLiant Server May Unexpectedly Reboot And Display Event ID 57 Error Messages. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c01802766
HP BladeSystem servers (BL series) utilize the software contained in the HP ProLiant Support Packs (PSPs). PSPs are available on the SmartStart CD.
HP ProLiant Essentials Rapid Deployment Pack (RDP), SmartStart Scripting Toolkit and SmartStart 7.xx deploy HP BladeSystem servers. SmartStart 7.00 and later provides assisted installation support for HP ProLiant BL Servers by utilizing the I/O port with an attached USB CD-ROM device.
SmartStart is not delivered standard with these servers, but can be a useful addition to RDP — the recommended deployment solution for HP BladeSystem servers. The CD can be used to create a server profile that can easily be copied and redistributed via RDP.
SmartStart supports the deployment of the HP ProLiant DL380 G3 Packaged Cluster but does not deploy the full clustering solution. For more information on deploying a full clustering solution, visit the HP ProLiant Clusters page.
Supported Devices and Features:
For a detailed listing of SS8.70 supported servers, please visit SmartStart 8.70 Server Support Guide.
- Microsoft Windows Server 2003 x64 Edition (Including R2 & Base Edition)
- Microsoft Windows Server 2008 x64 — All Editions
- Microsoft Windows Server 2008 R2
- Microsoft Windows Server 2008 R2 Foundation Edition
- Microsoft Windows Server 2008 Essentials Business
- Microsoft Windows Server 2008 Foundation Edition
- Microsoft Windows Server 2008 Small Business
- Microsoft Windows Server 2011 Small Business and 2011 SBS Essentials
- Red Hat Enterprise Linux 5 (AMD64/EM64T)
- Red Hat Enterprise Linux 6 (AMD64/EM64T)
- SUSE LINUX Enterprise Server 10 (AMD64/EM64T)
- SUSE LINUX Enterprise Server 11 (AMD64/EM64T)
- HP ProLiant BL685c G7 Server Blade
- HP ProLiant BL685c G6 Server Blade
- HP ProLiant BL685c G5 Server Blade
- HP ProLiant BL685c Server Blade
- HP ProLiant BL680c G5 Server Blade
- HP ProLiant BL495c G6 Server Blade
- HP ProLiant BL495c G5 Server Blade
- HP ProLiant BL490c G7 Server Blade
- HP ProLiant BL490c G6 Server Blade
- HP ProLiant BL480c Server Blade
- HP ProLiant BL465c G7 Server Blade
- HP ProLiant BL465c G6 Server Blade
- HP ProLiant BL465c G5 Server Blade
- HP ProLiant BL465c Server Blade
- HP ProLiant BL460c G7 Server Blade
- HP ProLiant BL460c G6 Server Blade
- HP ProLiant BL460c G5 Server Blade
- HP ProLiant BL460c Server Blade
- HP ProLiant BL280c G6 Server Blade
- HP ProLiant BL260c G5 Server Blade
- HP ProLiant BL2x220c G7 Server Blade
- HP ProLiant BL2x220c G6 Server Blade
- HP ProLiant BL2x220c G5 Server Blade
- HP ProLiant DL980 G7 Server
- HP ProLiant DL785 G6 Server
- HP ProLiant DL785 G5 Server
- HP ProLiant DL585 G7 Server
- HP ProLiant DL585 G6 Server
- HP ProLiant DL585 G5 Server
- HP ProLiant DL585 G2 Server
- HP ProLiant DL580 G7 Server
- HP ProLiant DL580 G5 Server
- HP ProLiant DL580 G4 Server
- HP ProLiant DL385 G7 Server
- HP ProLiant DL685 G6 Server
- HP ProLiant DL385 G5p Server
- HP ProLiant DL385 G5 Server
- HP ProLiant DL385 G2 Server
- HP ProLiant DL380 G7 Server
- HP ProLiant DL380 G6 Server
- HP ProLiant DL380 G5 Server
- HP ProLiant DL370 G6 Server
- HP ProLiant DL365 G5 Server
- HP ProLiant DL365 Server
- HP ProLiant DL360 G7 Server
- HP ProLiant DL360 G6 Server
- HP ProLiant DL360 G5 Server
- HP ProLiant DL320s Server
- HP ProLiant DL320 G6 Server
- HP ProLiant DL320 G5p Server
- HP ProLiant DL320 G5 Server
- HP ProLiant DL120 G7 Server
- HP ProLiant ML370 G6 Server
- HP ProLiant ML370 G5 Server
- HP ProLiant ML350 G6 Server
- HP ProLiant ML350 G5 Server
- HP ProLiant ML350 G4 Server
- HP ProLiant ML330 G6 Server
- HP ProLiant ML310 G5p Server
- HP ProLiant ML310 G5 Server
- HP ProLiant ML110 G7 Server
- HP ProLiant SL390s G7 Server
Upgrade Requirement:
Recommended — HPE recommends users update to this version at their earliest convenience.
- Partition alignment on some large volumes that caused small amounts of unused space at the end of the disk
- Updates to partitioning for Windows SBS 2011 to prevent installation on undersized disks and to automatically use all disk space
- Updates to use HP-Branded 2008/2008SP1 combined media.
- Pre-Activation issue for HP branded media installations when using the assisted path installations
**ATTENTION** IMPORTANT WINDOWS INFORMATION:
If installing Windows® Server 2008 Service Pack 2 (x64) with four AMD Opteron™ 6200 Series Processors and greater than 32 cores, Microsoft hotfix kb2563727 will need to be applied. To install without this hotfix, reduce the processor core count to 32 or less through ROM Based Setup Utility (RBSU) until the hotfix is applied. For more information refer to: Microsoft Article ID 2563727 «0x000000BE» Stop error when you install Windows Vista or Windows Server 2008 if more than two 16-core Opteron™ 6200 Series processors are installed (http://support.microsoft.com/kb/2563727)
SmartStart v8.70b is the recommended SmartStart to use when installing HP Branded Microsoft® Windows® products. The previous version, SmartStart v8.70, does not support AMD Opteron TM 6200 Series Processors. To obtain SmartStart v8.70b, see the HP website: (http://www.hp.com/support). Note: No media will be provided. SmartStart 8.70b is web release only.
Windows® Small Business Server 2011 Essentials requires that a network card be connected during installation. If there is no network access, installation will stop with an error. In order to continue, user needs to connect the system to network and click reboot button on the screen. Rebooting may require the user to enter in the default password, «Admin». For best results, please insure the network ports are connected before beginning installation.
Important SmartStart 8.70 / 8.70b Information:
Beginning with the 8.70 release, Fibre Channel will not be loaded by default. Once the OS is loaded, all normal drivers including Fibre Channel will be available.
Customer Advisory c02981742 — SmartStart 8.70 — Unable to Install SmartStart From Operating System Media Onto a Bootable USB Key. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c02981742
Important SUSE Linux Enterprise Server 11 SP1 Information:
Customer Advisory c03035647 — SUSE Linux Enterprise Server 11 SP1- Linux Will Kernel Panic When Installing on an HP ProLiant Server With an AMD Opteron or 4200-series Processor or AMD Opteron 6200-Series Processor. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c03035647
Customer Advisory c03087321 — SUSE Linux Enterprise Server 11 SP1 — Xen May Stop Responding When Installing a Virtual Machine on an HP ProLiant Server With an AMD Opteron or 4200-Series Processor or AMD Opteron 6200-Series Processor. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c03087321
Important PSP Information:
Customer Advisory c01802766 — Integrated Lights-Out 2 (iLO 2) Firmware Version 1.81 (Or Earlier) And iLO 2 Management Controller Driver Version 1.11.1.0 (Or Earlier) — ProLiant Server May Unexpectedly Reboot And Display Event ID 57 Error Messages. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c01802766
| Тип: | Программное обеспечение — CD-ROM | |||||||||||||
| Версия: | 8.70(B)(1 дек 2011) | |||||||||||||
| Операционная система(ы): |
| |||||||||||||
Описание
Улучшения
New SmartStart 8.70b Features:
- Support for newly released AMD Opteron 6200 Series Processors. NOTE: 8.70b is web release only — no media will be provided for this release.
Hardware and Software Support:
Инструкции по установке
HP SmartStart CD x64 version 8.70 (B) contains one or more software components that were signed with a digital signature that was revoked on October 21, 2014. Refer to Customer Advisory c04395762 for more information about affected components.
To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:
| 86b1ecf8aad403ea93dfd019cd3ad1971dcf5380d72bbc5ea1287ea29334dafb | smartstart-8.70B-0-x64.zip |
Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
For Available Support Documentation for SmartStart 8.70 and 8.70b:
Contents of this ZIP file:
Making a physical CD from an ISO image file
Download the file to a temporary directory and extract the ISO image to that directory.
To create a CD from this ISO image, you must use a software utility capable of writing an ISO file to a recordable media such as CD-R.
- Note: Simply copying the ISO file to a CD-R will NOT result in a usable CD. HP recommends you run MD5 Checksum on the Zip file and/or ISO image prior to burning the CD. HP also recommends that you turn the verify feature «ON».
CD labeling: For reference purposes, please label your resulting CD as follows:
Copying the ISO Image file to the HP USB Key Utility For Windows
The HP USB Key Utility is a Windows application that will allow the user to copy the Firmware Maintenance CD contents to a USB memory key. Users may then run the Firmware Maintenance applications from a USB key instead of from the CD. To download the HP USB Key Utility for windows, go to: www.hp.com/go/foundation.
Замечания о версии
HP SmartStart CD x64 version 8.70 (B) contains one or more software components that were signed with a digital signature that was revoked on October 21, 2014. Refer to Customer Advisory c04395762 for more information about affected components.
Upgrade Requirement:
Recommended — HPE recommends users update to this version at their earliest convenience.
**ATTENTION** IMPORTANT WINDOWS INFORMATION:
If installing Windows® Server 2008 Service Pack 2 (x64) with four AMD Opteron™ 6200 Series Processors and greater than 32 cores, Microsoft hotfix kb2563727 will need to be applied. To install without this hotfix, reduce the processor core count to 32 or less through ROM Based Setup Utility (RBSU) until the hotfix is applied. For more information refer to: Microsoft Article ID 2563727 «0x000000BE» Stop error when you install Windows Vista or Windows Server 2008 if more than two 16-core Opteron™ 6200 Series processors are installed (http://support.microsoft.com/kb/2563727)
SmartStart v8.70b is the recommended SmartStart to use when installing HP Branded Microsoft® Windows® products. The previous version, SmartStart v8.70, does not support AMD Opteron TM 6200 Series Processors. To obtain SmartStart v8.70b, see the HP website: (http://www.hp.com/support). Note: No media will be provided. SmartStart 8.70b is web release only.
Windows® Small Business Server 2011 Essentials requires that a network card be connected during installation. If there is no network access, installation will stop with an error. In order to continue, user needs to connect the system to network and click reboot button on the screen. Rebooting may require the user to enter in the default password, «Admin». For best results, please insure the network ports are connected before beginning installation.
Important SmartStart 8.70 / 8.70b Information:
Beginning with the 8.70 release, Fibre Channel will not be loaded by default. Once the OS is loaded, all normal drivers including Fibre Channel will be available.
Customer Advisory c02981742 — SmartStart 8.70 — Unable to Install SmartStart From Operating System Media Onto a Bootable USB Key. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c02981742
Important SUSE Linux Enterprise Server 11 SP1 Information:
Customer Advisory c03035647 — SUSE Linux Enterprise Server 11 SP1- Linux Will Kernel Panic When Installing on an HP ProLiant Server With an AMD Opteron or 4200-series Processor or AMD Opteron 6200-Series Processor. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c03035647
Customer Advisory c03087321 — SUSE Linux Enterprise Server 11 SP1 — Xen May Stop Responding When Installing a Virtual Machine on an HP ProLiant Server With an AMD Opteron or 4200-Series Processor or AMD Opteron 6200-Series Processor. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c03087321
Important PSP Information:
Customer Advisory c01802766 — Integrated Lights-Out 2 (iLO 2) Firmware Version 1.81 (Or Earlier) And iLO 2 Management Controller Driver Version 1.11.1.0 (Or Earlier) — ProLiant Server May Unexpectedly Reboot And Display Event ID 57 Error Messages. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c01802766
HP BladeSystem servers (BL series) utilize the software contained in the HP ProLiant Support Packs (PSPs). PSPs are available on the SmartStart CD.
HP ProLiant Essentials Rapid Deployment Pack (RDP), SmartStart Scripting Toolkit and SmartStart 7.xx deploy HP BladeSystem servers. SmartStart 7.00 and later provides assisted installation support for HP ProLiant BL Servers by utilizing the I/O port with an attached USB CD-ROM device.
SmartStart is not delivered standard with these servers, but can be a useful addition to RDP — the recommended deployment solution for HP BladeSystem servers. The CD can be used to create a server profile that can easily be copied and redistributed via RDP.
SmartStart supports the deployment of the HP ProLiant DL380 G3 Packaged Cluster but does not deploy the full clustering solution. For more information on deploying a full clustering solution, visit the HP ProLiant Clusters page.
Supported Devices and Features:
For a detailed listing of SS8.70 supported servers, please visit SmartStart 8.70 Server Support Guide.
- Microsoft Windows Server 2003 x64 Edition (Including R2 & Base Edition)
- Microsoft Windows Server 2008 x64 — All Editions
- Microsoft Windows Server 2008 R2
- Microsoft Windows Server 2008 R2 Foundation Edition
- Microsoft Windows Server 2008 Essentials Business
- Microsoft Windows Server 2008 Foundation Edition
- Microsoft Windows Server 2008 Small Business
- Microsoft Windows Server 2011 Small Business and 2011 SBS Essentials
- Red Hat Enterprise Linux 5 (AMD64/EM64T)
- Red Hat Enterprise Linux 6 (AMD64/EM64T)
- SUSE LINUX Enterprise Server 10 (AMD64/EM64T)
- SUSE LINUX Enterprise Server 11 (AMD64/EM64T)
- HP ProLiant BL685c G7 Server Blade
- HP ProLiant BL685c G6 Server Blade
- HP ProLiant BL685c G5 Server Blade
- HP ProLiant BL685c Server Blade
- HP ProLiant BL680c G5 Server Blade
- HP ProLiant BL495c G6 Server Blade
- HP ProLiant BL495c G5 Server Blade
- HP ProLiant BL490c G7 Server Blade
- HP ProLiant BL490c G6 Server Blade
- HP ProLiant BL480c Server Blade
- HP ProLiant BL465c G7 Server Blade
- HP ProLiant BL465c G6 Server Blade
- HP ProLiant BL465c G5 Server Blade
- HP ProLiant BL465c Server Blade
- HP ProLiant BL460c G7 Server Blade
- HP ProLiant BL460c G6 Server Blade
- HP ProLiant BL460c G5 Server Blade
- HP ProLiant BL460c Server Blade
- HP ProLiant BL280c G6 Server Blade
- HP ProLiant BL260c G5 Server Blade
- HP ProLiant BL2x220c G7 Server Blade
- HP ProLiant BL2x220c G6 Server Blade
- HP ProLiant BL2x220c G5 Server Blade
- HP ProLiant DL980 G7 Server
- HP ProLiant DL785 G6 Server
- HP ProLiant DL785 G5 Server
- HP ProLiant DL585 G7 Server
- HP ProLiant DL585 G6 Server
- HP ProLiant DL585 G5 Server
- HP ProLiant DL585 G2 Server
- HP ProLiant DL580 G7 Server
- HP ProLiant DL580 G5 Server
- HP ProLiant DL580 G4 Server
- HP ProLiant DL385 G7 Server
- HP ProLiant DL685 G6 Server
- HP ProLiant DL385 G5p Server
- HP ProLiant DL385 G5 Server
- HP ProLiant DL385 G2 Server
- HP ProLiant DL380 G7 Server
- HP ProLiant DL380 G6 Server
- HP ProLiant DL380 G5 Server
- HP ProLiant DL370 G6 Server
- HP ProLiant DL365 G5 Server
- HP ProLiant DL365 Server
- HP ProLiant DL360 G7 Server
- HP ProLiant DL360 G6 Server
- HP ProLiant DL360 G5 Server
- HP ProLiant DL320s Server
- HP ProLiant DL320 G6 Server
- HP ProLiant DL320 G5p Server
- HP ProLiant DL320 G5 Server
- HP ProLiant DL120 G7 Server
- HP ProLiant ML370 G6 Server
- HP ProLiant ML370 G5 Server
- HP ProLiant ML350 G6 Server
- HP ProLiant ML350 G5 Server
- HP ProLiant ML350 G4 Server
- HP ProLiant ML330 G6 Server
- HP ProLiant ML310 G5p Server
- HP ProLiant ML310 G5 Server
- HP ProLiant ML110 G7 Server
- HP ProLiant SL390s G7 Server
Исправления
Upgrade Requirement:
Recommended — HPE recommends users update to this version at their earliest convenience.
- Partition alignment on some large volumes that caused small amounts of unused space at the end of the disk
- Updates to partitioning for Windows SBS 2011 to prevent installation on undersized disks and to automatically use all disk space
- Updates to use HP-Branded 2008/2008SP1 combined media.
- Pre-Activation issue for HP branded media installations when using the assisted path installations
Важно
**ATTENTION** IMPORTANT WINDOWS INFORMATION:
If installing Windows® Server 2008 Service Pack 2 (x64) with four AMD Opteron™ 6200 Series Processors and greater than 32 cores, Microsoft hotfix kb2563727 will need to be applied. To install without this hotfix, reduce the processor core count to 32 or less through ROM Based Setup Utility (RBSU) until the hotfix is applied. For more information refer to: Microsoft Article ID 2563727 «0x000000BE» Stop error when you install Windows Vista or Windows Server 2008 if more than two 16-core Opteron™ 6200 Series processors are installed (http://support.microsoft.com/kb/2563727)
SmartStart v8.70b is the recommended SmartStart to use when installing HP Branded Microsoft® Windows® products. The previous version, SmartStart v8.70, does not support AMD Opteron TM 6200 Series Processors. To obtain SmartStart v8.70b, see the HP website: (http://www.hp.com/support). Note: No media will be provided. SmartStart 8.70b is web release only.
Windows® Small Business Server 2011 Essentials requires that a network card be connected during installation. If there is no network access, installation will stop with an error. In order to continue, user needs to connect the system to network and click reboot button on the screen. Rebooting may require the user to enter in the default password, «Admin». For best results, please insure the network ports are connected before beginning installation.
Important SmartStart 8.70 / 8.70b Information:
Beginning with the 8.70 release, Fibre Channel will not be loaded by default. Once the OS is loaded, all normal drivers including Fibre Channel will be available.
Customer Advisory c02981742 — SmartStart 8.70 — Unable to Install SmartStart From Operating System Media Onto a Bootable USB Key. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c02981742
Important SUSE Linux Enterprise Server 11 SP1 Information:
Customer Advisory c03035647 — SUSE Linux Enterprise Server 11 SP1- Linux Will Kernel Panic When Installing on an HP ProLiant Server With an AMD Opteron or 4200-series Processor or AMD Opteron 6200-Series Processor. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c03035647
Customer Advisory c03087321 — SUSE Linux Enterprise Server 11 SP1 — Xen May Stop Responding When Installing a Virtual Machine on an HP ProLiant Server With an AMD Opteron or 4200-Series Processor or AMD Opteron 6200-Series Processor. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c03087321
Important PSP Information:
Customer Advisory c01802766 — Integrated Lights-Out 2 (iLO 2) Firmware Version 1.81 (Or Earlier) And iLO 2 Management Controller Driver Version 1.11.1.0 (Or Earlier) — ProLiant Server May Unexpectedly Reboot And Display Event ID 57 Error Messages. Full details of the Customer Advisory can be viewed at: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c01802766
История изменений
Заявление об отказе от ответственности Продукты, проданные до 1 ноября 2015 года, т.е., до момента раздела компании Hewlett-Packard на компании Hewlett Packard Enterprise и HP Inc., могут иметь старые наименования и номера моделей, отличающиеся от текущих моделей.