Hp network configuration utility for windows server 2008 x64 r2

Драйверы и программное обеспечение

HP Network Configuration Utility for Windows Server 2008 R2

Загрузка файла означает ваше согласие с условиями и положениями Лицензионного соглашения на программное обеспечение Hewlett Packard Enterprise.
Примечание. Для использования некоторых программ необходимо наличие действующей гарантии, контракта на поддержку с Hewlett Packard Enterprise или оплаченная лицензия.

This software now supports the following network adapters:

• HP Ethernet 1Gb 4-port 331i-SPI Adapter
• HP Ethernet 10Gb 2-port 560SFP+ Adapter

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Notes:
Additional documentation is available in the HP NIC Documentation softpaq, version 10.65.

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This software addresses an issue where the HP NIC teaming driver may not initiate a failover when the primary NIC miniport driver of the team indicates that the NIC has been reset.

Описание

Улучшения

This software now supports the following network adapters:

• HP Ethernet 1Gb 4-port 331i-SPI Adapter
• HP Ethernet 10Gb 2-port 560SFP+ Adapter

Инструкции по установке

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

Замечания о версии

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Notes:
Additional documentation is available in the HP NIC Documentation softpaq, version 10.65.

Исправления

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This software addresses an issue where the HP NIC teaming driver may not initiate a failover when the primary NIC miniport driver of the team indicates that the NIC has been reset.

История изменений

Заявление об отказе от ответственности Продукты, проданные до 1 ноября 2015 года, т.е., до момента раздела компании Hewlett-Packard на компании Hewlett Packard Enterprise и HP Inc., могут иметь старые наименования и номера моделей, отличающиеся от текущих моделей.

Источник

Драйверы и программное обеспечение

HP Network Configuration Utility for Windows Server 2008 R2

Загрузка файла означает ваше согласие с условиями и положениями Лицензионного соглашения на программное обеспечение Hewlett Packard Enterprise.
Примечание. Для использования некоторых программ необходимо наличие действующей гарантии, контракта на поддержку с Hewlett Packard Enterprise или оплаченная лицензия.

This software now supports the following network adapters:

• HP Ethernet 1Gb 4P 366FLR Adapter
• HP Ethernet 10Gb 2-port 530T Adapter
• HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
• HP Ethernet 10Gb 2-port 560M Adapter

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Notes:
Additional documentation is available in the HP NIC Documentation softpaq, version 10.70.

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This software addresses an issue where the Windows warning event ID49 was generated when a second VLAN setting was added on a teamed device.

This software addresses an issue where link diagnostics failed on the NC375T PCI Express Quad Port Gigabit Server Adapter.

This software addresses an issue where an 802.3ad team failed when Receive Path Validation (RPV) was disabled.

Описание

Улучшения

This software now supports the following network adapters:

• HP Ethernet 1Gb 4P 366FLR Adapter
• HP Ethernet 10Gb 2-port 530T Adapter
• HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
• HP Ethernet 10Gb 2-port 560M Adapter

Инструкции по установке

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

Замечания о версии

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Notes:
Additional documentation is available in the HP NIC Documentation softpaq, version 10.70.

Исправления

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This software addresses an issue where the Windows warning event ID49 was generated when a second VLAN setting was added on a teamed device.

This software addresses an issue where link diagnostics failed on the NC375T PCI Express Quad Port Gigabit Server Adapter.

This software addresses an issue where an 802.3ad team failed when Receive Path Validation (RPV) was disabled.

История изменений

Заявление об отказе от ответственности Продукты, проданные до 1 ноября 2015 года, т.е., до момента раздела компании Hewlett-Packard на компании Hewlett Packard Enterprise и HP Inc., могут иметь старые наименования и номера моделей, отличающиеся от текущих моделей.

Источник

Драйверы и программное обеспечение

HP Network Configuration Utility for Windows Server 2008 R2

Загрузка файла означает ваше согласие с условиями и положениями Лицензионного соглашения на программное обеспечение Hewlett Packard Enterprise.
Примечание. Для использования некоторых программ необходимо наличие действующей гарантии, контракта на поддержку с Hewlett Packard Enterprise или оплаченная лицензия.

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This software now supports the following network adapters:

• HP Ethernet 1Gb 4-port 331FLR Adapter
• HP Ethernet 1Gb 4-port 331T Adapter
• HP Ethernet 1Gb 4-port 331i Adapter
• HP Ethernet 1Gb 2-port 361i Adapter
• HP Flex-10 10Gb 2-port 530FLB Adapter
• HP Flex-10 10Gb 2-port 530M Adapter
• HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
• HP Flex-10 10Gb 2-port 552M Adapter
• HP FlexFabric 10Gb 2-port 554FLB Adapter
• HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
• HP FlexFabric 10Gb 2-port 554M Adapter

When attempting to install or update a supported system with HP Network Configuration Utility for Windows Server 2008 R2 version 10.50.0.0, the system needs to be updated with HP Network Configuration Utility for Windows Server 2008 R2 version 10.65.0.0, if any of the following errors occur:

• «This program has been blocked for your protection»
• «Blocked»
• «Not Trusted»
• MSIExec installation error (Return code: 1625)
• «The recommended software listed below could not be installed…»

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

When attempting to install or update a supported system with HP Network Configuration Utility for Windows Server 2008 R2 version 10.50.0.0, the system needs to be updated with HP Network Configuration Utility for Windows Server 2008 R2 version 10.65.0.0, if any of the following errors occur:

• «This program has been blocked for your protection»
• «Blocked»
• «Not Trusted»
• MSIExec installation error (Return code: 1625)
• «The recommended software listed below could not be installed…»

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Notes:
Additional documentation is available in the HP NIC Documentation softpaq, version 10.50.

Описание

Улучшения

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This software now supports the following network adapters:

• HP Ethernet 1Gb 4-port 331FLR Adapter
• HP Ethernet 1Gb 4-port 331T Adapter
• HP Ethernet 1Gb 4-port 331i Adapter
• HP Ethernet 1Gb 2-port 361i Adapter
• HP Flex-10 10Gb 2-port 530FLB Adapter
• HP Flex-10 10Gb 2-port 530M Adapter
• HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
• HP Flex-10 10Gb 2-port 552M Adapter
• HP FlexFabric 10Gb 2-port 554FLB Adapter
• HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
• HP FlexFabric 10Gb 2-port 554M Adapter

Инструкции по установке

When attempting to install or update a supported system with HP Network Configuration Utility for Windows Server 2008 R2 version 10.50.0.0, the system needs to be updated with HP Network Configuration Utility for Windows Server 2008 R2 version 10.65.0.0, if any of the following errors occur:

• «This program has been blocked for your protection»
• «Blocked»
• «Not Trusted»
• MSIExec installation error (Return code: 1625)
• «The recommended software listed below could not be installed…»

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

Замечания о версии

When attempting to install or update a supported system with HP Network Configuration Utility for Windows Server 2008 R2 version 10.50.0.0, the system needs to be updated with HP Network Configuration Utility for Windows Server 2008 R2 version 10.65.0.0, if any of the following errors occur:

• «This program has been blocked for your protection»
• «Blocked»
• «Not Trusted»
• MSIExec installation error (Return code: 1625)
• «The recommended software listed below could not be installed…»

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Notes:
Additional documentation is available in the HP NIC Documentation softpaq, version 10.50.

История изменений

Заявление об отказе от ответственности Продукты, проданные до 1 ноября 2015 года, т.е., до момента раздела компании Hewlett-Packard на компании Hewlett Packard Enterprise и HP Inc., могут иметь старые наименования и номера моделей, отличающиеся от текущих моделей.

Источник